Wimbledon Village Projects

Project A. an approximately 4500 square foot newly built luxury Georgian style home. We carried out a full electrical installation with Lutron Lighting Control and an AV installation through parts of the property inside & out.

Front Elevation (Day)  Front Elevation (Night)   Kitchen   Staircase  

Landing
 

Project B. an approximately 4500 square foot newly built luxury Georgian style home. This installation proved to be very innovative and we worked closely with a specialist lighting company to achieve a high specification finish.

Entrance Hall (1) Entrance Hall (2)  Cloakroom   Staircase   Shower En-suite (Master Bedroom)   Kitchen (1)   Kitchen (2)   Kitchen (3)   Kitchen (4)   Plant Room

 

Cheam Refurbishment

This home was extended and fully refurbished, we brought it up to date with an exciting rewire including unique lighting features.

Entrance Hall   Dining Room   Kitchen (1)  Kitchen (2)  Kitchen (3)   TV Room   Family Bathroom   En-suite (Master Bedroom)

 

Weybridge New Builds

Project B. was a 12,000 square foot executive property, we undertook a full design & installation, including AV and computer network as well as a fully integrated lighting control system for indoor & outdoor entertaining.

Front Elevation   Rear Elevation   Loggia   TV Room   Swimming Pool   Bathroom TV   Basement Bathroom

 

American Bar & Grill - O2 Arena

The ability to create a mood setting ambience within a competitive budget was the specification set out to Lighting Projects Ltd For the American bar and Grill at the recently refurbished O2 Arena in London.

Ease of installation around tight curves was the requirement, so Lighting Projects Ltd RGB Elektor-FLEX Crystal was the perfect solution.

Fed via the PWM Power Supply Units, Elektor-FLEX Crystal enabled the restaurant owners the Incgroup to chose from a virtuoso of 16.8 millions colours and set the mood of the restaurant, dependant of the function.
 

Torquay Harbour Bridge

For this project the client wanted to create a stunning effect, without creating any maintenance problems. Fibre optics had been trialled but the poor light outputs simply did not create the effect required

Trials of Elektor-FLEX were carried out and the system was chosen as it created brilliantly the desired effects. As access for maintenance is a problem, i.e. Scaffolding required which would result in the bridge being taken out of commission it was essential that the chosen product was virtually maintenance free. The result was that Elektor-FLEX created the exact effects the client wanted, in a way that would require virtually no on going maintenance

Neon Lighting had originally been considered, but Neon Lighting is manufactured from Glass and operates at typically 30,000 volts. The Lighting on the bridge is in a location where the public could easily touch it, so the scenario of Glass Tubes and High voltage on a Bridge over water, speaks for it self. In addition Neon requires each tube to factory manufactured to the exact shape required

Elektor-FLEX comes on a roll, can be cut to length and shaped on site. It operates at 24v DC and is made of soft polymers, so even if you were to throw a brick at it, it would simply bounce off.

The installation was designed and specified by Designers, C Spencer Ltd of Hull, working with our Technical Sales Consultants, and was installed with ease by the installation contractor, Sercon Controls Ltd of Huddersfield. The finished project has created a stunning feature in Torquay, the combination of product selection, good design and good installation have culminated in a project that all concerned can be proud to be associated with.